Is vinegar an effective sanitizing agent for home beer brewing?
Home brew books and stores recommend using chlorine or idodine to sanitize your brew kit, but has anyone tried using plain old vinegar? Obviously I wouldn’t be using a “raw” vinegar with live cultures, but couldn’t the good old white stuff work to kill unwanted contaminants? Seems like it would be easier on the enviroment and my wallet, too. Let me know if you’ve had any experience disinfecting with vinegar. Thanks.
8 Comments
Leave a comment
Recent Posts
Categories
- beer at home
- beer brewing equipment
- beer brewing kits
- beer brewing supplies
- beer kits
- beer making
- brew beer at home
- brew your own
- brewing at home
- brewing yeast
- home beer brewing
- home brew
- home brew beer
- home brew cider
- home brew kits
- home brew supplies
- home brewery
- home brewing
- home brewing equipment
- home brewing for
- home brewing kits
- home brewing supplies
- your own beer
Tags
American Homebrewers Association Barley Batches beer Beer Brewing Beer Drinkers Beer Enthusiasts Beer Industry Beer Lovers beer making Beers brew Brew Beer Breweries Brewers Brewers Association brewing Brewing Beer Brewing Co Craft Beer Craft Beers Craft Breweries Craft Brewers Craft Brewery Craft Brewing flavors Google Head Brewer home home beer brewing Homebrew home brew Home Brewed Beer Home Brewer Home Brewers Home Brewing Home Brewing Beer Home Brewing Kit home brewing supplies home brew supplies hops India Pale Ale Microbrewery Pale ale yeast
No, it’s not an effective sanitizer. It doesn’t kill microorganisms because it’s not a strong enough acid. Commercial vinegar is actually less acidic than what is produced by an acetobacter contamination in your beer/wine/brew of your choice. If there is any present contamination, the vinegar would be as useful as water to just rinse out what’s there…it will not sanitize.
As mentioned before, bleach is tons more cost effective. Moreso, it actually sanitizes. The vinegar may be useful to dissolve any mineral deposits, and that’s if it’s allowed to soak for a while, but it will not kill any bad bugs.
no, just use a tablespoon of bleach, it all gets rinsed out anyways and you don’t want to take the chance of getting weird bacteria and making your beer funky.
It’s not as effective. Given the sensitivity of the brewing process, you’re much better off and safer using bleach in hot water or a commercial sterilizing compound.
look for the stuff that is meant to be used to clean out coffee pots, like at your local gas station. they are safe and will clean and sanitize.
Don’t skimp on the cleaning ingredients. If you get a wild bacteria or fungus spore growing in your brew, the whole batch gets tossed. Then how hard is it on the wallet?
I wouldn’t, if your get bacteria in your brew it will go NASTY and you’ll be out more than just a few dollars. If you insist on using vinegar use it in ONE SMALL batch for a test. Good luck.
Bleach is much less expensive than vinegar, you only need a 5% to10% solution to effectively sanitize your equipment. No need to worry about environmental hazrds, the chlorine evaporates from the water quickly.
You are trying to eliminate the live cultures, hence the use of chlorine or iodine